使用掃描器進行產品攝影 令人大開眼界的產品拍攝方法
我們在一篇 Etsy 文章中找到了這個方法；一位賣家用平台掃描器拍攝珠寶產品照片。 我們也想測試一下這個方法，看是否能拍出很好的產品照片。 結果超乎我們的預期，的確是拍攝一些產品照片的快速便捷的方法。 您在使用掃描器進行產品拍攝時，需要注意以下事項。
非常抱歉，此内容僅有英文版。 View a machine-translated version
Examples of product photos taken with a scanner and then edited in Clipping Magic
Which scanners work
We tried both a cheap scanner built into an all-in-one printer and a more expensive high DPI scanner for this. We found that cheap scanners did not produce a great result. They didn't have the resolution and the depth of field to handle anything other than flat documents.
Photos taken of earrings on a High DPI (left) vs Cheap (right) Scanner
What did work great was the Epson Perfection V600 Photo Scanner (currently available for around 200 bucks on Amazon, you can also find refurbished ones for less). This scanner's resolution went all the way up to 12,800 DPI (Dots Per Inch, or in simpler terms how much detail it's capturing) which is probably more than you would ever need. You should use a higher DPI for your smaller objects, but you probably won't need to go past 1,600 DPI.
How to use a scanner to take product photos
Place your object on the scanner bed. Make sure whatever you're going to scan is as close to the bed glass as possible.
Instead of closing the top over the products, we just covered them with a sheet of white paper. You can play around with what works best for your products, whether that's using the cover, a piece of paper, or leaving it completely uncovered.
This is the resulting product photo from this scanning method after being edited in Clipping Magic
Which products does a scanner work well with
Scanners can work great for smaller, flatter objects that aren't reflective or metallic. We tried scanning earrings, trinkets, and flatter alcohol bottles and got similar results to what we achieved with a DSLR + studio setup.
Photos taken of earrings on a DSLR (left) vs the High DPI Scanner (right) — both were edited in Clipping Magic
Which products do not work well with a scanner
We found that highly reflective or metallic products don't work well with a scanner. This includes gold/silver earrings and gemstones. The way the scanner captures an image doesn't work well for reflective objects. This is strongly evident in the example below where we compare the image of a highly reflective gold earring taken both in a light box with a DSLR and in our scanner.
Photos taken of reflective metallic earrings on a DSLR + light box (left) vs the High DPI Scanner (right) — both were edited in Clipping Magic
tl;dr
如果您沒有充裕的空間或時間，無法建立完整的工作室，高解析度掃描器是非常好的替代方案。 儘管裝備齊全的工作室能夠獲取最佳產品相片，使用掃描器也能獲取令人滿意的結果。 如何選擇取決於您的預算、已有的設備以及您銷售的產品。
Like this article? Spread the word.
These may interest you as well.
